Elastomer's charactrictic and properties are derived from the manufactures and purely indicative. It means the actual working conditions and limit may differ from the values referrd. Since many factors influence corrosion and abrasion due to type of fluid, concentration, temperature, turbulence, impurities and etc, the final choice is to be taken care by the customer.

Elastomers
Chemical group
General Application
Service Temperature
EPDM
Ethyene
propylene
Ethlens Propylene
Terpolymer
Water-Steam
Sea Water
Brine
Esters
Alkalis
Ozone
Ketones
Alcohols
Brake Fluid
Treated Water With
Caustic soda
-15°C †0 + 110°C
NBR/BUNA-N
Nitrile rubber
Butadien Acrylontrile
Copolymer
Hydrocarbons
Natural Gas
Oil and Fat
Air
Gasoline
-10°C †0 + 80°C
SBR
-
Acids and Alkails
-20°C †0 + 80°C
FPM Viton
Fluorocarbon polymer
Viton
Acids Oils
Hydrocarbon
-20°C †0 + 150°C
SI Silicone
Organic silicon polymer
Food
Beverage
-20°C †0 + 140°C
PTFE Teflon
Polyflon TFE
Solvents
Corrosive Products
-10°C †0 + 200°C
CR Neoprene
Chloroprene polymer
Acid, Ozone, Oils
Fats
Solvents
-10°C †0 + 90°C

TOP